Sensoren und Steuerung für Dispositivos de nivel de llenado

Fluid.iO Protección contra sobrellenado y sonda de fugas

 

Nuestros sistemas de prevención de sobrellenado robustos y sondas de fugas controlan de forma fiable los contenedores y depósitos de líquidos y ofrecen protección contra el sobrellenado y las fugas.

Nuestras sondas de fugas están diseñadas para detectar posibles fugas en una fase temprana para evitar daños medioambientales y peligros para las personas y la maquinaria.

Los sistemas de control contra el sobrellenado garantizan que los depósitos y contenedores nunca se llenen en exceso, ya que realizan mediciones precisas del nivel y detienen automáticamente el proceso de llenado cuando se alcanza un punto crítico.

Los dispositivos de prevención contra el sobrellenado y las sondas de fugas están homologados por la DiBt para líquidos que contaminan el agua y para el control de cámaras colectoras, dispositivos colectores, pozos de inspección y de llenado.

Nuestros dispositivos de medición de nivel ofrecen diseños de dispositivos adecuados en cuanto a material, medio y conexiones para una amplia gama de industrias y aplicaciones. La tecnología de medición inteligente se encuentra en carcasas de sensores con un diseño robusto, lo que garantiza la seguridad y el control necesarios para un funcionamiento fiable en todo momento, incluso en entornos exigentes.

EE-2XF

Conductive electrodes as overfill protection for Ex-Zone 0 (Cat. 1)

EX WHG overfill protection

Conductive electrodes EE-2XF for monitoring conductive liquids within the Ex area Zone 0 (Cat. 1) for water-polluting and flammable liquids.

EF 3…5 24 V

Conductive electrodes with 24 V DC direct connection

WHG overfill protection

The conductive electrodes EF3...5 are approved by the "DIBt" as overfill prevention devices for liquids hazardous to water.

EF2 24...230 V

Conductive electrodes with 24...230 V direct connection

WHG overfill protection

The EF2 overfill protection (24...230 V AC/DC) is approved by "DIBt" as an overfill protection for liquids hazardous to water.

EF2...5

Conductive Electrodes with general approval for constructions

WHG overfill protection

Conductive electrodes type EF2...5 are approved by the “DIBt” (German Institute for Structural Engineering) as liquid level limit switches for the overfill protection of containers for storing water-endangering liquids

EF2…5 24V

Conductive electrodes with and without 24 V DC direct connection

WHG overfill protection

The conductive electrodes EF2...5 are approved by the "DIBt" as overfill prevention devices for liquids hazardous to water.

EFV2 20…230V

Conductive electrodes with 24...230 V direct connection

WHG overfill protection

The overfill protection EFV2 (24...230 V AC/DC) is approved by the "DIBt" as overfill protection for liquids hazardous to water.

EFV2 24V

adaptive conductive electrodes with and without 24 V direct connection

WHG overfill protection

The conductive electrode EFV2 is approved by the "DIBt" as an overfill prevention device for liquids hazardous to water.

ELH

Suspension electrode as leakage probe

WHG leakage detector EX

The leakage probes of the type series ELH are approved by the "DIBt" for the monitoring of collecting chambers, collecting devices, inspection and filling shafts.

ELH 230 V

Hanging electrode as leakage probe 24...230 V AC/DC

WHG leakage detector

The leakage probes of the type series ELH are approved by the "DIBt" for the monitoring of collecting chambers, collecting devices, inspection and filling shafts.

ELH 24 V

Hanging electrode as leakage probe 24 V DC

WHG leakage detector

The leakage probes of the type series ELH are approved by the "DIBt" for the monitoring of collecting chambers, collecting devices, inspection and filling shafts.

EP

Plate Electrode as Leak Detector (conductive)

EX leakage detector WHG

with general approval for constructions and EC-Type-Examination Certificate for Ex-zone 1(Cat. 2)

EP 24V

Plate Electrode as Leak Detector (conductive)

EX leakage detector WHG

with general approval for constructions Z-65.40-191

T-200.F Ex

Overfill protection for containers with Ex approval

WHG EX overfill protection

Vista 3D

Level sensors type T-20_.F... are approved by the DIBt (German Institute for Structural Engineering) as liquid level limit switches for the overcharge protection of containers for storing water-dangerous liquids.

T-200.L

Leakage probes with general building authority approval

WHG leakage detector

Vista 3D

The leakage probes T-200.L are approved by the "DIBt" on the basis of the "WasBauPVO" for the detection of leaked liquids hazardous to water.

T-200.L

Leakage probes with general building authority approval

WHG leakage detector

Vista 3D

The leakage probes T-200.L are approved by the "DIBt" on the basis of the "WasBauPVO" for the detection of leaked liquids hazardous to water.

T-200.L 230V

Leakage probes with general building authority approval

WHG leakage detector

Vista 3D

The leakage probes T-200.L are approved by the "DIBt" on the basis of the "WasBauPVO" for the detection of leaked liquids hazardous to water.

T-200.L 24V

Leakage probes with general building authority approval

WHG leakage detector

Vista 3D

The leakage probes T-200.L (24 V) are approved by the "DIBt" on the basis of the "WasBauPVO" for the detection of leaked liquids hazardous to water.

T-200.L Ex

Leakage probes with general building authority approval for hazardous areas

WHG EX leakage detector

Vista 3D

The leakage probes T-200.L are approved by the "DIBt" on the basis of the "WasBauPVO" for the detection of leaking water-polluting liquids. The T-200.L Ex may be used as leakage probes in hazardous areas, zone 1 (category 2).

T-20x.F 230V

Overfill protection for containers

WHG overfill protection

Vista 3D

Level sensors type T-20_.F... are approved by the DIBt (German Institute for Structural Engineering) as liquid level limit switches for the overcharge protection of containers for storing water-dangerous liquids.

T200.F

Overfill protection for containers

WHG overfill protection

Vista 3D

Level sensors type T-20_.F... are approved by the DIBt (German Institute for Structural Engineering) as liquid level limit switches for the overcharge protection of containers for storing water-dangerous liquids.

T200.F-24V

Overfill protection with 24V direct connection

WHG overfill protection

Vista 3D

Level sensors type T-20_.F... are approved by the DIBt (German Institute for Structural Engineering) as liquid level limit switches for the overcharge protection of containers for storing water-dangerous liquids.

T203.F

Overfill protection for containers

WHG overfill protection

Vista 3D

Level sensors type T-20_.F... are approved by the DIBt (German Institute for Structural Engineering) as liquid level limit switches for the overcharge protection of containers for storing water-dangerous liquids.

T204.F

with general building authority approval Z-65.11-404

WHG overfill protection

Vista 3D

T205-0.F

Ex area zone 0 (category 1)

WHG EX overfill protection

Vista 3D

The magnetic immersion probes T20... are used to detect fill level limit values in containers for liquid media, where an explosive atmosphere of zone 0 (cat. 1) is present in the gas space above the liquid and Ex zone 1 (cat. 2) is present outside the container, in the area of the junction box.

T209-0.F

Magnetic immersion probe overfill protection for Ex zone 0 (Cat. 1)

WHG EX overfill protection

Vista 3D

The magnetic immersion probes T20... are used to detect fill level limit values in containers for liquid media, where an explosive atmosphere of zone 0 (cat. 1) is present in the gas space above the liquid and Ex zone 1 (cat. 2) is present outside the container, in the area of the junction box.

T20x.F

Overfill protection for containers

WHG overfill protection

Vista 3D

Level sensors type T-20_.F... are approved by the DIBt (German Institute for Structural Engineering) as liquid level limit switches for the overcharge protection of containers for storing water-dangerous liquids.

¡Nuestros ingenieros de aplicaciones le asesoran personal, completa y profesionalmente!

¡Póngase en contacto con nosotros por teléfono o por escrito!

¡Llámenos ahora!

+49-6251-8462-0

Formulario de contacto

Logo of Fluid.iO Sensor + Control

Fluid.iO
Sensor + Control
GmbH & Co. KG

An der Hartbrücke 6
64625 Bensheim
Tel.: +49-6251-8462-0
E-Mail: info@fluidio.de