Descripción del producto
Based on non-dispersive infrared technology (NDIR), ZILA GmbH has developed an inline-capable measuring system that permanently monitors the oil condition directly in the system. The optical measuring system consists of a multi-channel infrared measuring cell with associated electronics and peripherals.
Datos técnicos
Información general
- Carcasa
- Robustes Aluminiumgehäuse
- Tensión de funcionamiento
- 18...36V DC (max. 400 mA @18V)
- Dimensiones
- 150 x 119 x 82 mm (L x B x H)
Condiciones de funcionamiento
- Temperatura de funcionamiento:
- 0...+70 °C (optional 0...+90 °C)
- Presión máxima de funcionamiento
- 10 bar (optional 30 bar)
- Temperatura de almacenamiento
- -40...+90 °C
Conexión
- ModBus TCP/IP
- Ethernet-Port für Kommunikation über herstellerunabhängiges Busprotokoll
- Puertos de E/S digitales
- 1x Digital In 18...36V (10 mA max.), 4x Digital Out 18...36V (5 mA max.)
Funcionamiento
- Interfaz de usuario
- grafisch über Weboberfläche im eingebundenen Netzwerk
Más información del producto
When measuring with NDIR technology, the molecules present in the oil absorb the infrared light to different degrees at certain wavenumbers due to their typical bonding forms. In the course of the operating time, these molecular properties change, whereby a signal change can be detected in certain areas of the infrared spectrum. The system thus continuously provides real-time information about the oil condition, which should be comparable to laboratory measurements. The electronics are controlled and configured via a user-friendly graphical user interface. Digital outputs and a ModBusTCP/IP interface allow easy integration into the system control.
Convenient commissioning and operation through graphical user interface
The sensor can be conveniently integrated into existing and new systems. Digital signals and ModBusTCP/IP allow the sensor to be connected directly and easily to a control system. A user-friendly interface helps to quickly configure the sensor settings. Measuring intervals can be defined and various limit values can be set according to the oil parameters. Another option allows the recorded measurement results to be displayed graphically. The trend shown in this way already provides information about the current status of the oil condition and can be used for early detection. All changes are logged.
Measurement parameters
Depending on the detector configuration, up to 6 quantities can be determined simultaneously:
- Water content
- Oxidation
- Reciprocal oxidation
- Nitration
- Sulphation
- Carbon black content
- Anti-wear additive
- ZDDP anti-wear additive
- EP/AW additive
- Aminic antioxidant additive
Documentos y descargas
Hoja de datos
Instrucciones de instalación y funcionamiento
Vídeo sobre el producto
Productos relacionados
Fluidix Lub-VDT
Oil condition sensor for permanent monitoring of mechanical properties of liquids
Ir al producto
