Description
The measuring transducer Tk101 and Tk101Ex are built directly into the connection boxes of our Liquid Level Measuring Instruments of type TK-30.
Technical Data
Properties
- Operating temperature
- -20...+60 °C
- Storage temperature
- -40...+80 °C
- Ex-protection
- siehe Zertifikat
- CE marking
- siehe Konformitätserklärung
Input
- Resistance range in three-wire circuit
- 4...10 kΩ
- Measuring current
- 0,8 mA @ RE = 4 kΩ
- Measuring current
- 0,33 mA bei RE = 10 kΩ
- Measuring voltage
- 3,3 V
Supply/Output
- 2-wire
- 4...20 mA
- Voltage(Um)
- 11...28 V DC
- Burden / load
- 0...800 Ω |RBürde max = [(Um - Um min) / 0,02] Ω
- Output signal in case of error
- max. 24 mA
Fault influences
- Max. Total error
- ± 1 %
- Temperature influence
- -0,015 % / °C
- Supply voltage influence
- 0,025 % / V
Setting range
- Full deflection
- 60...105 %
- Zero point adjustment
- 0...25 %
TK-101 configuration
Your Configuration
- Basename
- TK101
- ATEX
Further product information
The measuring transducer TK101Ex is also approved for use in explosive atmospheres Ex zone 0 (Cat. 1). For this purpose, the measuring transducer must be supplied with an intrinsically safe control circuit. The resistance signal of the measurement transducer is converted to an unit current signal (4...20 mA). If there is an error in the connecting to the transducer chain, it is displayed with a current value I > 22 mA. The maximum burden resistance is dependent on the supply voltage of the unit current. If the Liquid Level Measuring Instrument are used in Ex zones, this may only be operated via a Zener barrier or by an approved Ex feeding unit.
Documents and Downloads
Data sheet
Mounting and installation instructions
test certificate
products in this series
1 variants are displayed
Accessoires
AD-310
go to product
