TK-315

Evaluation unit with 4 limit contacts (NO-contacts)

Features

4...20 mA 0...10 V

product family

Alarm

product class

signal transducer

suitable for

measurement principle

Special characteristics

  • Control & detection of fill levels via 0(4)...20 mA or 0...10 V input signal

  • Digitally adjustable switching points

  • Free adjustment of the 4 limit values over the entire measuring length

Description

The TK-315 limit comparator can be used in conjunction with our TK-30... continuous level sensors with 0(4)...20 mA or 0...10 V output signal for level control/measurement. 

Technical Data

Properties
Protection class EN60529 clamp
IP 20
Protection class EN60529 front panel housing
IP 40
Operating temperature
–20...+60 °C
nominal voltage
24... 230 V AC/DC
Power consumption
2 VA
Dimensions housing type B
22,5 x 114,5 x 99 mm
Dimensions housing type C
22,5 x 114,5 x 114 mm
Input
power
0/4...20 mA
Voltage
0...10 V
Resistance in three-wire circuit RG
0–4...10 kΩ
Output
Output contacts
4 Schließerkontakte
Switching voltage
max. 250 V AC
Switching current
max. 3 A
Switching capacity
max. 500 VA
Temperature influence tolerance
max. ± 0,6 % der Signalspanne
Mounting
Tragschiene nach EN 50022
Current output
4...20 mA bezogen auf die Masse des Eingangs
Display (%)
2-stellig, 7-Segment
Weight
175 g

TK-315 configuration

TK-315 1 - 2

1 Gehäuse

  • B : Steckklemme (verschraubbar)
  • C : Steckklemme (Federkraft)

2 Eingang

  • 0 : 0/4 ... 20 mA
  • 3 : Widerstand 0-4...10 kΩ

Further product information

Where more than 4  limit values (NO-contacts) are required, individual limit comparators can be connected in parallel to form a functional unit. 
All limit values can be adjusted freely over the entire measuring length.


The signal at the input of the limit comparator is compared with switchpoint values which can be  adjusted digitally by the user.  If this limit values are exceeded or not reached, the respective isolated  output contact operates.  The output relays of the TK-315 limit comparator operate on an open-circuit current principle. The measuring signal is indicated digitally in %. The TK-315 possesses a wide range power pack and can be operated by  24 V DC to 230 V AC . 

Documents and Downloads

Our application engineers advise you personally, comprehensively and professionally!

Simply contact us by phone or e-mail!

Call us right away!

+49-6251-8462-0

contact form

Logo of Fluid.iO Sensor + Control

Fluid.iO
Sensor + Control
GmbH & Co. KG

An der Hartbrücke 6
64625 Bensheim
Tel.: +49-6251-8462-0
E-Mail: info@fluidio.de