Description
The TK-315 limit comparator can be used in conjunction with our TK-30... continuous level sensors with 0(4)...20 mA or 0...10 V output signal for level control/measurement.
Données techniques
Propriétés
- Classe de protection EN60529 pince
- IP 20
- Classe de protection EN60529 boîtier du panneau avant
- IP 40
- Température de fonctionnement
- –20...+60 °C
- tension nominale
- 24... 230 V AC/DC
- Consommation électrique
- 2 VA
- Dimensions boîtier type B
- 22,5 x 114,5 x 99 mm
- Dimensions boîtier type C
- 22,5 x 114,5 x 114 mm
Entrée
- Puissance
- 0/4...20 mA
- Tension d'alimentation
- 0...10 V
- Resistance in three-wire circuit RG
- 0–4...10 kΩ
Sorties
- Contacts de sortie
- 4 Schließerkontakte
- Tension de commutation
- max. 250 V AC
- Courant de commutation
- max. 3 A
- Capacité de commutation
- max. 500 VA
- Tolérance de l'influence de la température
- max. ± 0,6 % der Signalspanne
- Montage
- Tragschiene nach EN 50022
- Sortie de courant
- 4...20 mA bezogen auf die Masse des Eingangs
- Affichage (%)
- 2-stellig, 7-Segment
- Poids
- 175 g
TK-315 configuration
| TK-315 | 1 | - | 2 |
Autres informations sur les produits
Where more than 4 limit values (NO-contacts) are required, individual limit comparators can be connected in parallel to form a functional unit.
All limit values can be adjusted freely over the entire measuring length.
The signal at the input of the limit comparator is compared with switchpoint values which can be adjusted digitally by the user. If this limit values are exceeded or not reached, the respective isolated output contact operates. The output relays of the TK-315 limit comparator operate on an open-circuit current principle. The measuring signal is indicated digitally in %. The TK-315 possesses a wide range power pack and can be operated by 24 V DC to 230 V AC .
