Description
The leakage probes T-200.L are approved by the "DIBt" on the basis of the "WasBauPVO" for the detection of leaked liquids hazardous to water.
Technical Data
Connection
- Box
- Polyesterdose (PO)
Properties
- Protection class
- IP 65
- Cable entry
- PVDF-Verschraubung , PVC-Dichtung
- Material Float
- PE
- Material leakage probe base
- PE
- Cable
- TPK (PVC Basis)
- Operating temperature
- max. 60 °C
- Operating pressure
- atmosphärisch
- media density
- ρ ≥ 0,6 g/cm³
- Switching hysteresis
- typ. 2 mm
- Switching point tolerance
- max. 2 mm
Power supply
- nominal voltage
- 24…230 V AC/DC
- Power consumption
- ≤ 2 W
Output
- Output contact
- 2 potentialfreie Wechselkontakte
- Switching voltage
- max. 250 V AC / 30 V DC
- Switching current
- max. 5 A AC / 5 A DC
- Switching capacity
- max. 750 VA / 90 W
- displays
- Betriebs-LED grün, Funktions-LED rot
- Switching delay
- ca. 0,5 s Anzug/Abfall
- CE marking
- siehe Konformitätserklärung
T-200.L 230V configuration
| T200L | 1 | - | 2 | - | 3 | - | 4 | - | 5 |
Further product information
The T-200.L (24...230 V AC/DC) may be used, among other things, as leakage probes in the space between a tank and its associated catch basin. The float switches the reed contacts mounted in the guide tube via a magnet system when the liquid level rises. The resistance change in the sensor circuit of the electronic part triggered by the switching operation is evaluated and the output relay is activated. The electronic part ET-580a is mounted in the junction box.
The output relay operates in closed-circuit mode, i.e. in the event of an alarm, the output relay drops to the alarm position.
System structure
The leakage probe T-200.L (24...230 V AC/DC) can be connected to our "Optical Acoustic Alarm Devices" of the type series OAA-300.. (see section 01).
- Simple structure
- Rugged design
- Small dimensions
- Low system costs
- Interference free measurement
- High chemical resistance
- Functionally identical to the overfill protection of the "T-200.F..." series
- Evaluation in the connection head
- Problem-free, variable installation (rope design)
- Unproblematic setting and checking
- Supply voltage 24...230 V AC/DC
Documents and Downloads
Data sheet
Settings instructions
Safety instructions
technical description
declaration of conformity
Accessoires
OAA-300
go to product
