Description
Inside the float, one or two reed contacts with a movable permanent magnet are inserted as a switching element.
Technical Data
Properties
- Protection class EN60529
- IP 68
- Cable entry
- PVC , PTFE
- Conductor cross-section
- 3 x 0,75 mm², PUR 3x0,5mm²
- Switching system
- Reed-Schalter
- Contact
- Wechsler, NO, NC (QFS-11 nur NO oder NC)
- Switching voltage
- 4...250 V AC/DC
- Switching current
- 1 mA ...1 A
- Switching capacity
- max. 1A, 60 VA/60 W
- Switching hysteresis
- ca. 100 mm
- Switching angle
- ca. + 20° / – 20°
Float
- Material Float
- PE (Polyethylen)
- ltdata.
- ltdata.
- ltdata.
Operating temperature
- TPK(V), AEM
- max. + 60 °C
- PUR
- max. + 70 °C
- Silicone,Tefloncable with PE float
- max. + 80 °C
Operating pressure
- Cylinder
- max. 1 bar
- Sphere
- max. 2 bar
QFS-1X configuration
Your Configuration
- Basename
- QFS1
- Schwimmertyp
- Kontakt
- Schwimmermaterial
- Kabelmaterial
- TPK
- Kabellänge
- Ex
Further product information
The QFS-1. float switches can be supplied with an outer casing of polyethylene. Inside the float one or two reed contacts with a pivoted permanent magnet form the switching device. The switching device is so constructed that a slight shift of the switch from a horizontal position triggers off the signal. A highly flexible, three-core cable is used both for the electrical connection and for the mechanical attachment of the QFS. The whole QFS unit is so constructed that the float and the lead-in line are hermetically sealed.
