Description
The TK-313 limit comparator can be used in conjunction with our TK-30... continuous level sensors with 0(4)...20 mA or 0...10 V output signal for level control / measurement.
Technical Data
Properties
- Protection class EN60529 clamp
- IP 20
- Protection class EN60529 front panel housing
- IP 40
- Operating temperature
- –20...+60 °C
- nominal voltage
- 24... 230 V AC/DC
- Power consumption
- 2 VA
- Dimensions housing type B
- 22,5 x 114,5 x 99
- Dimensions housing type C
- 22,5 x 114,5 x 114
Input
- power
- 0/4...20 mA
- Voltage
- 0...10 V
- Resistance in three-wire circuit RG
- 0–4...10 kΩ
Output
- Output contacts
- 2 Wechselkontakte
- Switching voltage
- max. 250 V AC
- Switching current
- max. 3 A
- Switching capacity
- max. 500 VA
- Temperature influence tolerance
- max. ± 0,6 % der Signalspanne
- Mounting
- Tragschiene nach EN 50022
- Current output
- 4...20 mA bezogen auf die Masse des Eingangs
- Display (%)
- 2-stellig, 7-Segment
- Weight
- 175 g
- ltdata.
TK-313 configuration
| TK-313 | 1 | - | 2 |
Further product information
Where more than 2 limit values (change-over contacts) are required, individual limit comparators can be connected in parallel to form a
functional unit or the evaluator TK-315 can be used. All limit values can be adjusted freely over the entire measuring length.
The signal at the input of the limit comparator is compared with switchpoint values which can be adjusted digitally by the user.
If this limit values are exceeded or not reached, the respective isolated output contact operates. The output relays of the TK-313 limit comparator operate on an open-circuit current principle. The measuring signal is indicated digitally in %. The TK-313 possesses a wide range power pack and can be operated by 24 V DC to 230 V AC .
