Description
Les capteurs ViscoScope® sont fabriqués en acier inoxydable de première qualité et convainquent par leur construction intelligente et robuste.
Données techniques
Propriétés
- Classe de protection
- IP65
- Matériau
- 1.4571 / 1.4404 (316Ti / 316L)
- Température du processus
- -40°C … +450°C
- Pression du processus
- Vakuum ... 450 bar
- Raccords de process
- DIN Flansch | ANSI Flansch | NPT | Varivent® | Tri-Clamp
- Longueur de câble capteur - transmetteur
- max. 1.000m
- max. flow velocity
- 10 m / sec
- Approbation Ex
- (optional) II 1/2G Ex ia IIC T6...T3 Ga/Gb
- Matériel (optionnel)
- Hastelloy C22, Duplex 2205, Teflon
Type de capteur
- big cylinder
- VA-300L
- small cylinder
- VA-300M
- Sphère
- VA-300H
- small sphere
- VA-300X
Plage de mesure
- VA-300L
- 0,1 - 2.500 mPa·s x g/cm³
- VA-300M
- 1 - 25.000 mPa·s x g/cm³
- VA-300H
- 100 - 250.000 mPa·s x g/cm³
- VA-300X
- 100 - 2.500.000 mPa·s x g/cm³
Dimensions de la sonde
- VA-300L
- Ø 32 x 190 mm
- VA-300M
- Ø 32 x 165 mm
- VA-300H
- Ø 32 x 130 mm
- VA-300X
- Ø 19 x 115 mm
ViscoScope® VA-300 configuration
Votre configuration
- Nom de la base
- VA-300
- Viscosity
- Temperature
- Process-Connection
- Material
- Non-active-Extension
- Ex-Bereich
Autres informations sur les produits
Each ViscoScope® viscometer has a Pt100 integrated in the sensor. The ViscoScope VA-300 sensors allow a large number of variants and are therefore manufactured to order. This ensures optimal installation in new and existing plants. Other special features include CIP / SIP capability, surface Ra < 0.2 µm, installation without dead space or intrinsically safe installation.
The ViscoScope® sensors are made of high-quality, first-class stainless steel and impress with their intelligent, robust design. All parts in contact with the process are completely welded. Moving parts do not wear out and there are no leaks that damage the inside of the sensor housing. Each ViscoScope® viscometer has a Pt100 integrated into the sensor. The ViscoScope VA-300 sensors allow a wide range of variants and are therefore manufactured to order. This ensures optimal installation in new and existing plants. Further special features are the CIP / SIP capability, surface Ra <0.2 µm, dead space free installation or intrinsically safe installation.
The ViscoScope inline sensor VA-300 requires no maintenance and is designed for accurate, reproducible and reliable measurement of the dynamic viscosity of liquids in real-time. A Pt100 integrated into the probe simultaneously measures the process temperature.
The probe of the ViscoScope® sensor is fully welded to ensure that no moving parts come into contact with the fluid being measured. Electric coils drive the probe at its resonance frequency and stimulate it to an oscillating torsion at a small amplitude. A fast closed-loop PID controller keeps the amplitude constant. Thus the higher the viscosity, the higher the voltage required. This can be used to measure the dynamic viscosity in mPa·s x g/cm3 (η x ρ). The low amplitude at the resonance frequency prevents material fatigue, which could otherwise cause components to move or wear. It also ideal for ensuring that the instrument has a long, reliable and maintenance-free service life.
The ViscoScope® VA-300 sensor is manufactured to order and therefore available in a wide range of versions that optimize installation in new or existing plants. This variety of sensor designs often allows them to be installed with little or no modification to the potential installation site. The sensor can be installed in any position but it should be selected carefully in order to ensure cost-efficient measurements.
The ViscoScope® VA-300 sensor is a versatile instrument for many industrial applications:
- vacuum or high pressure
- very low or high temperatures
- in secure areas or areas with potentially explosive atmospheres
- CIP / SIP compliant or with no dead spaces
In continuous processes, viscosity is monitored permanently. This permits timely adjustment of the system or optimum dosing. Batch applications are often reactive processes, in which the viscosity curve and achieving a specified target viscosity define the optimum point for stopping the process.
However, the degree of homogenization, concentration, molecular weight distribution, coating thickness, lubrication performance and phase separation can also be inferred from the measurement signal – the potential uses are simply limitless. Marimex® has already implemented apparently impossible applications and successfully put them into operation. Most liquids are non-Newtonian so relative viscosity is the relevant measurement in processes. The ViscoScope® system is factory- calibrated using certified Newtonian calibration oils. This multipoint calibration allows the user to obtain reproducible results, e.g. when several systems are used in the same applications, after repair or relocation to a different plant. In order to compare the process viscosity with a known laboratory viscosity, it is necessary to calculate a correlation empirically.
Documents et téléchargements
Fiche technique
Informations générales
Instructions de montage et d'installation
Certificat de contrôle
déclaration de conformité
Vidéo sur le produit
Produits similaires
VS-D250
Transmitter for ViscoScope viscosity sensors
Voir le produitViscoScope® VA-100
Viscosimètre de processus en ligne
Voir le produitFluidix Lub-VDT
Capteur d'état d'huile pour la surveillance permanente des propriétés mécaniques des liquides
Voir le produit