Description
The float switch combination is built with float switches of the QFS-50 and QFS-60 series. This makes it possible to control a level in a simple way.
Technical Data
Technical Data
- Material
- PTFE (Teflon)
- connection cable
- Silikon, Teflon
- Material rod
- VA-Rohr, PTFE beschichtet
- Operating temperature
- max. +150 °C
- media density
- ρ ≥ 0,75 g/cm³
- Switching system
- Reed-Schalter
- Contact
- Wechsler, NO, NC
- Inductive/capacitive loads
- Unbedingt Kontaktschutz vorsehen
- Ex-protection optional
- Elektrische Daten siehe EG-Prüfbescheinigung IBExU10ATEX 1089
Reed contact
- Switching current
- 1 mA ... 1 A
- Switching voltage
- 24 ... 250 V AC/DC
- Switching capacity
- Max. 1A, 60 VA / 60 W
- Switching hysteresis
- ca. 100 mm
- Switching angle
- ca. +20°...–20°
Namur circuit (1kΩ/12kQ)
- Switching current / switching voltage
- nur zum Anschluss an KR-163... oder andere „Namur”-Relais
- Switching hysteresis
- ca. 100 mm
- Switching angle
- ca. +20°...–20°
QFS-55 configuration
QFS | 1 | - | 2 | - | 3 | - | 4 | - | 5 | - | 6 |
Further product information
When using 2 float switches, one working as a maximum contactor and the other as a minimum contactor, you achieve
automatic level control. In addition, the float switch can be used as overflow and dry run protection. The float of the QFS-55 float switch combination is made of Teflon. Inside the float, one or two reed contacts with a movable permanent magnet are inserted as switching element. The design of the switching element is such that even a slight displacement of the switching element from the horizontal triggers the switching operation.